Table of content
Published on: 21.01.2024 | updated on: 08.04.2024
Are you sick of dealing with the iPhone being stuck on the Apple logo problem? Like you, many other people experience this problem, and that is where we help you with reasons, solutions, and how you can prevent the problem from occurring in the future.
Problems can happen for different reasons and in different situations, and we are trying to cover as many scenarios as possible and give solutions for all. Read on to learn more about the Apple logo stuck on the iPhone and what you can do.
This article discusses various problems that can cause the Apple logo to stay on the screen, such as overheating, dropping the phone, failed updates, water damage, and bugs. We also discuss solutions to help fix the problems, such as resetting the device, cooling the device down, professional phone repair for water and screen damage, and reinstalling iOS.
Different reasons could cause the Apple logo to linger on the screen. Let’s check them out below:
Update failed
Jailbreaking the phone
Hardware glitch
Overheating
iPhone has been dropped
Bugs
Water damage
Transferred corrupted files
Here are our solutions for an iPhone with the Apple logo stuck on the screen.
DFU restore
Factory restore
System Repair
Reinstall iOS
Let the phone cool down
Water damage will require professional repairs
A replacement screen
Update the phone
Contact a professional for advice
We have a few reasons why this could be happening, and discuss what you can do about this annoying situation.
Corrupted files
Overheating
Not enough battery power
For a phone that has overheated, you must let it cool down for an hour or so before starting up. If it still doesn’t start up, the overheating may have caused internal damage that will need to be seen by a professional.
The battery may be flat. You may not have enough battery power, and sometimes, depending on the model of the iPhone, you may experience it starting up, but it may just give you the Apple sign before completely dying. Simply charge up and see if it starts up.
For corrupted files that you may have transferred or downloaded, you can try to reset the phone by following these steps:
Press then let go of the volume up button
Do the same for the volume down button
Now press and hold the power button
The phone should start up if this has fixed the problem
To prevent a phone from overheating, avoid leaving the phone near heat sources or direct sunlight.
To avoid the battery going flat, keep the phone sufficiently charged
If you suspect corrupted files are the problem, you can try to reset the phone, and if that works, go straight in and delete those files immediately.
You can do a few simple things if you have a phone stuck with the Apple logo on the screen. See below.
iPhones need free storage to function correctly. If you have too much piled up on your phone, the system may not have enough space to work; therefore, the phone won’t start.
Ensure your PC has the latest iTunes installed, then connect your phone to your PC
Hold down the volume up key and let go, then do the same for the volume down button.
Press the button on the side and hold until the iTunes logo appears.
Go to the restore iPhone button, and then iTunes will reinstall iOS.
This will delete all your data, so it’s important to make backups when you can. If you don’t want to lose anything, seek professional advice and see if they can help without losing data.
The best way to prevent corrupted files is never to open emails or download apps and software from third-party sites that are not reputable. A quick Google search can tell you if they are trusted or not.
Without enough space, the phone can't do its usual functions as each app, feature, and system uses space. You can delete old or duplicated pictures and transfer them to other storage options to delete them off the phone and save room. Avoid downloading high-tech games, as they can take up a lot of room.
It can be frustrating when your phone keeps displaying the Apple logo but keeps turning off. If this is happening to you, read on as we discuss the reasons and what to do about it.
Low battery power
A glitch in the system
Phone is overheating
To avoid overheating, keep the phone away from heat sources and direct sunlight
Glitches can occur naturally; it’s no fault of yours, but try to keep the device updated
For a flat battery, keep the phone sufficiently charged at all times
Is your iPhone stuck in a loop? Your phone may still be trying to update but keeps getting stuck; check out below what to do.
This problem can occur when updating the system or installing an app. It usually gets stuck and cannot bring itself out of the loop to start up.
Ensure the phone is charged, and then try a force restart. In some cases, it will fix the problem. If not, you will need to do the following:
Press and then let go of the volume up button
Do the same for the volume down button
Press the side button and hold until the logo appears
If this works, nothing else is required. If not, then you may need to do a DFU restore.
Sometimes, it just happens, and you cannot prevent it, but always ensure the phone is updated and there is sufficient charge of the phone so it doesn’t die before installing.
If you performed a hard reset and the phone now has the Apple logo on the screen, while it is annoying, there is a simple fix that will often fix the problem, so you don't need to see a professional.
This occurs when your system has suffered a malfunction. It can be caused if the phone dies during the reset or, at other times, simply from a malfunction.
You can only try to complete the hard reset steps you just did. If the phone does not turn back on after that, ensure it is charged and try again. If nothing happens, you need to seek professional help.
To prevent the malfunction of the Apple logo appearing after a reset, you can keep the phone updated and charged fully before doing a reset or ask a professional to do one if you have had problems with it before.
A hard reset can solve most glitches and bugs, but in rare cases, it may not work, and you end up with a phone that won’t start up but shows the Apple logo. Here is what you can do.
Most times, this problem when the Apple logo is on the screen is caused by bugs or bad apps. If your phone was in the middle of an update and died, it can cause the update to be corrupted. Therefore, the phone won’t start up.
For a phone stuck on the Apple logo after trying a hard reset that doesn’t work, try re-installing the iOS.
Connect the phone to iTunes, and once you see it there, force restart the phone again
When you see the recovery mode on the screen, you must choose update and then allow the computer time to download and reinstall the iOS. You will retain data.
Keep the phone updated
Ensure the phone is charged fully before updating
Avoid downloading apps and software from non-reputable sites
While it’s frustrating when your iPhone 11 is stuck on with the Apple logo on the screen and other websites, and a hard reset isn’t working. Don't worry; reinstalling the iOS is simple and often works for this problem.
If you are wondering what caused the Apple logo to appear after updating, we know why the problem occurred, what you can do about it, and how to prevent it from happening again.
The phone’s battery died while installing
There was a glitch in the system
If your phone battery dies while installing the update, it can cause the phone to become stuck and be unable to start up. A forced restart will usually fix the problem. You may need to install the update again.
If you have a glitch in the system, it can cause the phone to become stuck like the above situation, and again, trying a forced restart will usually fix the problem.
You can prevent this from occurring again by ensuring the phone is fully charged before installing updates.
If you have restored your phone and are now stuck with an Apple logo on the screen, you can check how to fix it below before getting it looked at by a professional.
A glitch has occurred
The phone died during restore
When a glitch occurs, you can try to force restart the phone. If that does not work, you may need to reinstall the iOS. You will retain data doing this.
For a phone that died during the restoration, place it on charge and charge it for half an hour, then try to reset the phone. If this works, the phone will automatically start up after resetting.
A phone with a glitch can just be a malfunction or a bug, and there is not much you can do to prevent this. Sometimes, the bug can even come from an update. If you have recently updated, talk to Apple and see if other reports have been made.
You can prevent a phone from dying during a restore by ensuring the phone is charged before restoring.
This is caused by a glitch either in the software of the phone or the update
The phone’s storage is full
For phone stuck on Apple logo with progress bar give it time, as some phones, especially older models, can take longer to install updates, etc. If the loading bar has not moved for half an hour, it is stuck, and you will need to force restart the phone. If this does not work, try connecting to iTunes and restoring the phone. If there is no luck, take the phone to a professional who can help solve the problem and determine a suitable solution.
For a glitch, keep the phone updated each time a new one comes out and ensure the phone is fully charged before installing updates.
To avoid a full storage capacity, keep photos to a minimum and delete duplicates. Transfer to other storage options for different files and media to keep the phone’s storage from filling up.
It can be a worry when you notice that your iPhone has a black screen with the Apple logo. You want to know why and whether it can be fixed, right? Check out the reasons and solutions below to see if they match your problem.
Logic board problems
Water damage
Unfortunately, unless you are experienced with the logic board of a phone, you will need to seek advice from a specialist about your options. Conducting repairs yourself can cause further damage that can be expensive.
A professional must also assess water damage if you are not experienced with working on phones yourself.
For logic board problems, avoid dropping the phone and keep it protected. Always use the correct charger for the phone to prevent too much or too little charge from getting through
For water damage, keep any sort of liquid away from the phone and keep it out of moisture-prone areas
You may wonder what has caused this, and we list a few reasons below. We also provide a way to prevent this from occurring again in the future.
The phone died during the installation of an update
Water damage
If your phone has died during an installation, try popping the phone on the charger for one hour, then try a force restart and see if the phone will start up. If you don’t have a computer, you will need to check out your options with a professional iPhone repair.
For water damage, there are no home remedies. It can be complex, and it is better to leave it to the professionals to avoid further damage to the phone. You need to get it to the repairer ASAP to prevent the water from spreading.
To prevent the phone from dying during an update, charge it fully before attempting to download and install updates.
To avoid water damage, don’t have any liquids near the phone. Keep the phone out of bathrooms, saunas, etc, as the moisture can seep into the phone, causing water damage.
Apple tells us to update our phones when updates are available, but upon doing so, there is a problem, and now you are stuck with an iPhone 6 with an Apple logo on the screen. Sometimes, updates can cause glitches or contain a bug, and Apple usually rectifies this by bringing out a new update to fix the glitches.
Different problems can be causing the Apple logo to stay on the screen. Some are minor, like glitches or low batteries, while others can be complex, such as water or logic board damage. In most cases, all the problems can be fixed; some will take longer, and the price can be higher the more complex it is.
Has your phone recently been wet, maybe dropped into water, or had a drink spill on it? Water can cause damage to the internals of a phone. When specific components have water damage, the phone will not be able to boot up and will need professional attention.
If your iPhone Plus 7 has the Apple logo on the screen and will not go any further you can try to soft reset it and see if that fixes the problem. A soft reset can fix minor glitches in the system and is worth trying before rushing to the a nearby repair store.
The iPhone 8 is an older model phone, so the parts can stop working due to normal wear and tear. When this occurs, you will need to weigh up how much the repairs are going to cost, as it might be more cost-effective to buy a new phone.
When the Apple logo appears on the screen, it means that the phone is stuck and cannot boot up. It can be from water damage, a bug, overheating, and even a bad battery. If you are unsure how to fix the issue and why it is occurring, the repair store can help you with that.
It is a popular model that came out and has had a good run, but if you notice that your phone cannot get past the Apple logo, you may have internal damage. There are a few different remedies and solutions that you can try first before rushing to the repair store.
Why is my phone stuck on the Apple logo screen? From brute force to moisture exposure or a glitch, there are options that you can take advantage of, from trying recommended tips and tricks at home to heading into the repair store for advice.
If you have recently dropped your iPhone and damaged the internals, it may be preventing the phone from starting up, and instead, you are stuck with the Apple logo on the screen. Other problems like water damage and corrupted files can also cause this problem.
Is your phone up to date? If you don’t have the latest updates installed, the phone can malfunction and give you the Apple logo without starting up. It’s essential to keep the phone updated to avoid this problem.
iPhone 11 Pro is giving you the Apple logo upon starting up but doesn't advance any further than that. This can be due to trauma to the phone and even an overheated phone that will not start up until it has completely cooled down.
It is frustrating that your iPhone 11 Pro Max is stuck on the Apple logo and isn’t doing anything else. If you have recently downloaded any new apps, they may be corrupted. If a soft reset works and the phone starts up, delete those apps before they cause more problems.
What causes the phone to be stuck with the Apple logo on the screen? A few things can cause this, like an outdated phone or malware after downloading suspicious emails. A soft reset can fix the problem.
Is your iPhone 12 Mini stuck on the Apple logo screen? Anything from water damage, a cracked screen, and logic board damage can cause this problem. These types of issues will need to be assessed by a professional.
If your phone died while installing an update, you might be experiencing the Apple logo stuck on the screen, but nothing else is happening. When it dies during an update, it can cause a glitch, and the phone becomes stuck, but it can be fixed.
While it is frustrating when your phone is stuck on the Apple logo, if it has occurred due to a minor problem like a software glitch or an update that failed to install correctly, it can be easily fixed in most cases with professional advice.
There are so many bugs and malware out there, and sometimes, downloading and opening suspicious emails can lead to problems with the phone, which can cause the phone to refuse to start up.
What can be done about a phone stuck on the Apple logo? It will depend on whether the phone has a minor problem like a glitch or whether it has a complex issue like water damage or a problem due to overheating.
There are many solutions for this problem, from resetting the device to installing the iOS again to getting professional assistance like a screen repair or overheating damage repair.
It can be a worry for a phone stuck on the Apple logo, but sometimes the cause is minor, and the problem can be fixed at home. In other cases, you may need professional advice if the problem is concerning the motherboard or other internals.
Has your phone turned off, and now all you can see is the Apple logo? It is at least starting and going that far, so that is a good sign. The Apple logo means that the phone is having trouble booting up.
If your phone is stuck on the Apple logo and you are unsure what to do, then you can call the professionals who can give you some solutions to try at home before taking the phone in to be repaired at the store.
If the Apple logo is stuck on the screen due to overheating, you can try waiting until the phone cools down and resetting the device. If that does not work, it may be time to contact a repair person for further instructions.
The iPhone 14 is a great phone but can sometimes come across problems such as being stuck with the Apple logo on the screen. When this occurs, you can try resetting the phone.
That Apple logo that is stuck on your screen can be caused by minor problems such as a glitch in the system or a failed update. The worst-case scenario is a failed motherboard or water damage that will need professional assistance.
One of the latest phones out, but it can still run into problems. If the phone is brand new and you are getting the Apple logo stuck on the screen, it could be a fault from the factory, and you will need to contact Apple.
If your iPhone won’t advance past the Apple logo page, something prevents it from booting up. In most cases, it can be from trauma or a failed update. A failed update can usually be fixed at home, but internal damage will need fixing by an expert.
Always charge the phone before updating or restoring
Keep the phone protected from water
Keep the phone out of direct sunlight
Never have the phone in moisture-prone areas
Avoid downloading apps and software from unfamiliar websites or emails
Keep the phone updated
Always use the proper charger for the model of phone you have
Seeing the Apple logo on the screen is common and can happen due to water damage, software bugs, moisture, logic board damage, outdated software, and malware. It’s good to try some tips at home before heading to the specialist. By knowing what is causing the problems, you can help to prevent them from occurring again.
Professional Content Creator
LinkedIn: Hollie Spooner
Hollie is a technical writer with over 15 years of experience specializing in creating content to help keep the rest of the world informed and updated on all tech-related subjects. Hollie has created content for many writing platforms in the tech and IT industry, and her passion for turning words into helpful articles is still growing. Hollie holds several certifications, like "Professional Article and Blog Writing", "Writing Editing and Publishing", "Creative Writing" and "Technology Digital Solutions" by Open Education and Thompsons Education Direct. When she isn’t creating content for the web, she is enjoying a crazy life with her family and friends.
State
Discover a stores nearby
Search by a zip code|city|state
Search in 12 partners, 7 state